1. English
2. Install Ubuntu
3. English
4. Select your Time Zone
5. Suggested Option
6. Use Entire Disk
7. Enter User Information and Computer information, I named mine 'foghat' with foguser
8. Install
9. Restart
10. Login
Install FOG
1. Open Firefox
2. Go to http://www.fogproject.org and download FOG.
3. Open Terminal Applications->Accessories->Terminal
4. cd Desktop (Remember Linux is case sensitive)
5. tar -xvzf fog*
6. cd fog*
7. cd bin
8. sudo ./installfog.sh
9. Select opt 2 Enter
10. N Enter
11. Default IP Enter
12. You dont need to set up a router IP but I will in case I ever use the server for DHCP.
13. Set up a DNS IP, just accept the default.
14. No do not change the default network interface.(you may not get this prompt if you have 1 nic)
15. I will not be using FOG for DHCP. (will require changing my current DHCP server.)
16. Note your IP settings and continue.
17. Enter to Acknowledge.
18. (I like to notify the FOG group, they have made a great product and deserve my feedback, choice is yours here)
19. gksu gedit /var/www/fog/commons/config.php and put your mysql password you typed during install in "MYSQL_PASSWORD", "
20. Browse to http://localhost/fog/management
21. Click install!
22. Click to log in. You can now reach this webpage from anywhere on the network where your server is installed by using it's ip address. eg http://192.168.0.100/fog/management I would reccomend putting an A record in your DNS called FOGSERVER this will make things easier to remember. default: fog/password
Set up DHCP (For Windows DHCP)
1. Log onto your Windows DHCP server
2. Open DHCP console.
3. Right Click Scope Options -> Configure Options
4. Scroll Down to number 66 check and give the hostname of FOGSERVER
5. Scroll down to number 67 check and give the value pxelinux.0
6. Apply and close.
Install FOG service on client (Host)
1. Log onto the PC
2. Browse to http://FOGSERVER/fog/client
3. Click to download
4. Open
5. Run Setup.exe in the Fogservice folder
6. Accept defaults (FOG does not like to be installed in locations other than default)
7. Enter the ip or preferrably the hostname if you created one. FOGSERVER
8. Save Changes, Done, Close.
9. Open services Start->Run->services.msc
10. Scroll down and start "Fog Service"
11. This would also be a good time to make sure that PXE is your primary boot option in BIOS, you might need to enable it.
Create an image file.
1. Click on Image management.
2. New Image
3. Give it a name, description, default storage group, filename, and Image type (choose wisely). For dell computers with a utility partition you will HAVE to select multiple partition single disk.
4. Add.
Assign Image to Host
Assign the Image to a host, this will be the image the host uses to restore and deploy from, You can assign this image to as many PCs as you want. Useful for group Deployment.
1. Click on Host management.
2. List all hosts.
3. Click Edit next to your machine.
4. In Host Image select the proper image that you created in the previous step from the dropdown.
Upload an image.
1. From another machine log onto http://FOGSERVER/fog/management login with fog/password
2. Click on Tasks (The Star)
3. List all Hosts
4. Click Upload next to the PC.
5. Upload image.
6. Click on active Tasks, and either wait for the PC to check in and autoreboot or Reboot it manually.
Test Restore/Deploy
1. Click on Tasks (The Star)
2. Click Deploy next to your PC.
3. Click image All computers.
4. Verify image by booting computer and making sure everything works.
